LEC Mould Remover Gel 100g/200g

1. Apply the gel to cover the mould.
2. After approximately 30 minutes, scrub with a toothbrush or similar while rinsing with water, then let it dry.
3. After use, securely close the cap and store in a cool, dark place.

Suitable for mould on:

• • Silicone sealant
  • Rubber seals and gaskets
  • Tile grout
  • Shower curtains
  • Selected bathroom accessories and small items

*Pre-clean or rinse off any dirt other than mould beforehand and ensure its dry before use.

*Using a spatula or similar tool for application may be helpful in some situation.

• • Use only for its intended purpose.
  • Wear suitable gloves when handling the product.
  • Ensure good ventilation during use.
  • Do not mix with other cleaning products.
  • Never mix with acidic cleaners or other products, as hazardous gases may be produced.
  • Avoid contact with eyes and skin.
  • Do not use on surfaces that are unsuitable for chlorine-based cleaning products.
  • Test on an inconspicuous area first if you are unsure whether the surface is compatible.
  • Do not use on metal, natural stone or other sensitive surfaces unless specifically confirmed suitable.
  • Keep out of reach of children.
  • Do not use in confined areas without adequate ventilation.
  • If the product gets into the eyes, rinse carefully with clean water and seek medical advice if irritation persists.
  • Always read the product packaging and follow the manufacturer's instructions before use.

Note: Product images are for illustrative purposes only. Packaging may differ from the pictures due to product update.