Richell Inflatable Baby Bath W (0-6months) Yellow

Size: approx. 68 x 47 x 29 cm

Capacity: Fully filled 25L

　　　　 At MAX scale line 10L

Colour: Yellow

Recommended Age: 0 ~ 6 months

Recommended length of baby: 49 ~ 66 cm

• This product is easy to use even for mothers and fathers with a first baby
• The inflatable baby bath is foldable, making it easy to store and carry. Also very useful when travelling!
• Baby-friendly soft bathtub
• Optimum water temperature: 37 - 40°C
• It is constructed with a horizontal air layer that is gentle on mothers' arms and a sturdy vertical air layer, making it both easy to use and strong
• The backrest has a good incline to keep the baby comfortably in the right position
• The stopper prevents the baby from slipping down
• Comes with a hook ring for drying after use
• Awards: First prize in the baby bath category – Tamahiyo Baby Goods Award 2022

1. Inflate the bath with air *
2. As soon as inflation is complete, put the air plug in firmly
3. Put the water plug in firmly and then fill with warm water *
4. Adjust the temperature of the water to the optimum temperature (37-40°C) and fill up to the MAX line
5. After use, drain the water through the plughole, wash and dry the bath at a well-ventilated place
6. Squeeze the air inlet between your fingers and press the bath gently to release the air

*Squeeze the air inlet between your fingers firmly to let the air in

*Inflate to the extent that some wrinkles still remain on the outside of the bath. If too much air is put in, the heat of the hot water may cause the air to expand and damages the bath

*When using an air pump, be careful not to insert the tip more than 12 mm from the inlet. The air hole may be pushed open and deformed, preventing it from returning to its original position

*Do not fill with hot water above 50°C

• Never leave the baby unattended during use
• Always support the baby's head with your hand during bathing to prevent drowning or water from getting into the ears
• Do not carry the bath with a baby in it
• Do not use this product on water but on a flat and stable surface
• When adding hot water, remove the child from the water first to avoid accidental burns
• Keep out of reach of children
• To prevent the formation of mould, wash and dry thoroughly after use
• Keep away from sharp objects

Note: Product images are for illustrative purposes only. Packaging may differ from the pictures due to product update